| Image |
Item Name |
Price |
|
SPLINTERGUARD FS-SP1400
000.49-0036
• Replacement splinterguard for guide rails FS and FS/2
|
|
|
|
SPLINTERGUARD FS-SP 800 (DISC)
000.49-0037
• Replacement splinterguard for guide rails FS and FS/2
|
|
|
|
SUCTION HOSE D36X3.5M A/S
000.49-0090
• With rotating adapter and connector
• 3.5 m
|
|
|
|
COUNTERSINK DRILL W DEPTH STOP
001.66-0009
• Ø 4.5 mm
|
|
|
|
REPLACEMENT DRILL BIT 3.5MMD
001.66-0019
• To be used with a counterbore with depth stop
|
|
|
|
CENTROTEC BIT HOLDER
001.66-0022
• Metal
|
|
|
|
BIT POZIDRIV HIQ PZ 1
001.66-0041
• For use with Festool cordless drills
• Length 100 mm
|
|
|
|
BIT POZIDRIV HIQ PZ 2
001.66-0042
• For use with Festool cordless drills
• Length 100 mm
|
|
|
|
HSS WOOD DRILL BIT SET
001.66-0062
• 19 piece
• SBKS-HSS D 1-10
• Ø 1-10 mm
|
|
|
|
THERMA-A-CAULK WHITE 300ML
003.52.000
• Suitable for most door frame, pipe and cable joints in all types of applications
• 4 hour fire rating in joints up to 35 mm wide filled 25 mm deep
• Suitable for vertical and horizontal joints
• Avoid contact with skin
|
|
|
|
ABRASIVE ROLL YELLOW 50M G320
005.44-0001
• For hand and power sanding
• For paint, plaster, filters, particle boards and softwoods
• Yellow aluminium oxide
|
|
|
|
*********DISCONTINUED*********
006.47.012
• To drill Ø 10 mm holes
• For press-fit connectors, shown in Related Products
|
|
|
|
KNOT BOR MACH BIT HM
006.47.076
• To drill Ø 10 mm holes
• For press-fit connectors, shown in Related Products
|
|
|
|
RUST PENETRATOR
007.34.610
• Looses rusted bolts, nuts, screws etc.
• Prevents new oxidation
• Lubricates any moving piece
• Prevents penetration of humidity
• Use only in well-ventilated areas
• 500 ml can
|
|
|
|
SINGLE EDGE RAZOR BLADES
008.42.109
• Reinforced back - 40 mm wide
|
|
|
|
230V/500W TUNGSTEN HALOGEN LAMP
008.75.269
• Replacement bulbs for 008.75.262 (tripod lights), shown in Related Products
|
|
|
|
STORE PRESSURE POWDER EXTINGUISHER 1L
008.85.100
• For putting out most types of fires. Extremely effective on electrical hazards, flammable liquids and gases, which makes it ideal for vehicle fires
• Stored pressure
• Squeeze grip operation
• Corrosion resistant finish
|
|
|
|
STORE PRESSURE POWDER EXTINGUI
008.85.101
• For putting out most types of fires. Extremely effective on electrical hazards, flammable liquids and gases, which makes it ideal for vehicle fires
• Stored pressure
• Squeeze grip operation
• Corrosion resistant finish
|
|
|
|
STORE PRESSURE POWDER EXTING 4L
008.85.103
• For putting out most types of fires. Extremely effective on electrical hazards, flammable liquids and gases, which makes it ideal for vehicle fires
• Stored pressure
• Squeeze grip operation
• Corrosion resistant finish
|
|
|
|
STORE PRESSURE POWDER EXTINGUIS
008.85.104
• For putting out most types of fires. Extremely effective on electrical hazards, flammable liquids and gases, which makes it ideal for vehicle fires
• Stored pressure
• Squeeze grip operation
• Corrosion resistant finish
|
|
|
|
STORE PRESSURE POWDER EXTING 9L
008.85.105
• For putting out most types of fires. Extremely effective on electrical hazards, flammable liquids and gases, which makes it ideal for vehicle fires
• Stored pressure
• Squeeze grip operation
• Corrosion resistant finish
|
|
|
|
CHIPBOARD SCREW C/S 3.5X16MM PZ F/THREAD
015.37.044
• Hospa brass screws, only for use in chipboard
• Countersunk head with cross-slot
|
|
|
|
CHIPBOARD SCREW C/S 3.5X30MM PZ F/THREAD
015.37.051
• Hospa brass screws, only for use in chipboard
• Countersunk head with cross-slot
|
|
|
|
CHIPBOARD SCREW C/S 4.0X20MM PZ F/THREAD
015.37.076
• Hospa brass screws, only for use in chipboard
• Countersunk head with cross-slot
|
|
|
|
CHIPBOARD SCREW C/S 4.0X35MM PZ F/THREAD
015.37.083
• Hospa brass screws, only for use in chipboard
• Countersunk head with cross-slot
|
|
|
|
D HANDLE 128CCMM MATT NICKEL
101.85.655
• Zinc alloy
• Screws not included, please see Fixing Materials
|
|
|
|
BAR HANDLE 684CCMM MATT BRUSHD SP
107.64-0008
• Stainless steel
|
|
|
|
PULL HANDLE 96CCMM + 2XM4 SCRW SP
107.95-0001
• Set consists of:
- 1x Finger pull handle, 96 mm hole centres, aluminium coloured zinc alloy (107.95.401)
- 2x M4 x 22 mm screws
|
|
|
|
PULL HANDLE 128CCMM TRANSP GREY
111.79.502
• Plastic
|
|
|
|
D HDL CAGE PEWTER 124CCX45MM SP
119.29.030
• 3 x 16 mm wood screws included
• Steel
|
|
|
|
BOW HANDLE 96CCMM ANTIQ BRASS
123.99.100
• Zinc alloy
|
|
|
|
BOW HANDLE 96CCMM ANTIQ PEWTER
123.99.900
• Zinc alloy
|
|
|
|
KNOB 34MMDIA ALU COLOURED
133.25.400
• Zinc alloy
• Screws not included, please see Fixing Materials
|
|
|
|
*********DISCONTINUED*********
133.25.600
• Zinc alloy
• Screws not included, please see Fixing Materials
|
|
|
|
KNOB MATT NICKEL 80X27MM
135.44.600
• Zinc alloy
• Screws not included, please see Fixing Materials
|
|
|
|
KNOB PINE 38X30MM+SCREWS SP
195.35-0011
• Consists of:
- 1 x 195.35-0027 Ø 38 mm pine knob
- 1 x 022.35.261 M4 x 26 mm screw
|
|
|
|
KNOB BEECH CLEAR LACQ 35X31MM
195.47.300
• 1 M4 x 25 mm fixing screw supplied
• Beech
|
|
|
|
PULL HANDLE 96MM MOCHA/ ST ST EFFECT
195.84.851
• Dims (length x depth x height): 155 x 45 x 22 mm
• Fixings not included - order M4 screws separately
• Wooden handle with zinc alloy centre
|
|
|
|
KEY 21/BRASS POL 40MM (DISC)
204.48.588
• With 40 mm effective shank length
• To choose a key suitable for your choice of lock
- Ensure lever bit matches the recommendation given for your chosen lock
- Use the door thickness table, shown on PDF Page, to corre
|
|
|
|
KEY MATT NICKEL PLATED 40MM
204.48.686
• With 40 mm effective shank length
• To choose a key suitable for your choice of lock
- Ensure lever bit matches the recommendation given for your chosen lock
- Use the door thickness table, shown on PDF Page, to corre
|
|
|
|
PICCOLO-NOVA ZI BRAS ANT LH 25
225.56.063
• For lever bit key
• Backset: 25 mm
• Screw fixing
• Left handed
• Use with doors up to 2 m high
• Uses two Ø 6 mm profile rods
• Accessories:
- Please see Related
|
|
|
|
*********DISCONTINUED*********
225.56.565
• For lever bit key
• Backset: 25 mm
• Screw fixing
• Left handed
• Use with doors up to 2 m high
• Uses two Ø 6 mm profile rods
• Accessories:
- Please see Related
|
|
|
|
PICCOLO NOVA NP LH 25MM
225.56.663
• For lever bit key
• Backset: 25 mm
• Screw fixing
• Left handed
• Use with doors up to 2 m high
• Uses two Ø 6 mm profile rods
• Accessories:
- Please see Related
|
|
|
|
ADAPTER HOUS.SYMO 3000 ZI.NP.M
229.82.690
• Matt nickel-plated zinc alloy
|
|
|
|
COIN LOCK MASTER KEY
231.59.900
• For use with locker lock
• Nickel silver finished steel
|
|
|
|
*********DISCONTINUED*********
246.75.211
• Surface mounted, screw fixing
• 4 kg pull
• Catch: Floating
• Counterpiece: Fixed
• Zinc alloy
|
|
|
|
*********DISCONTINUED*********
246.75.610
• Surface mounted, screw fixing
• 4 kg pull
• Catch: Floating
• Counterpiece: Fixed
• Zinc alloy
|
|
|
|
*********DISCONTINUED*********
246.75.611
• Surface mounted, screw fixing
• 4 kg pull
• Catch: Floating
• Counterpiece: Fixed
• Zinc alloy
|
|
|
|
*********DISCONTINUED*********
246.75.811
• Surface mounted, screw fixing
• 4 kg pull
• Catch: Floating
• Counterpiece: Fixed
• Zinc alloy
|
|
|
|
*********DISCONTINUED*********
262.27-0002
• For direct, screw-in installation in Ø 5 mm holes
• With special thread
• Tighten with cross-slot screwdriver size 2 only
• Steel
|
|
|
|
MINIFIX 15 BOLT GALV. S24/5MM
262.27.629
• For direct, screw-in installation in Ø 5 mm holes
• With special thread, tighten with cross-slot screwdriver size 2 only
• Steel
|
|
|
|
MINIFIX 15 BOLT ZI PL 34/5MM
262.28.629
• For direct, screw-in installation in Ø 5 mm holes
• With special thread, tighten with cross-slot screwdriver size 2 only
• Steel
|
|
|
|
MODULAR SCREW GALVANISED 16-24
262.47.923
• Collared
• For use with 10 - 13 mm wide Modular plates shown in Related Products
• For double sided installation in wood
• With M4 thread, for insertion through Ø 5 mm series-drilled holes
|
|
|
|
MODULAR SCREW GALVANISED 20-28
262.47.941
• Collared
• For use with 10 - 13 mm wide Modular plates shown in Related Products
• For double sided installation in wood
• With M4 thread, for insertion through Ø 5 mm series-drilled holes
|
|
|
|
CONNECT BOLT BRIGHT ST SCRW-IN
263.05.020
• For use with Slimfix housings only, please see Related Products
• With special thread
• For direct screw-in installation in Ø 5 mm holes
• Steel
|
|
|
|
CONNECTING BOLT GALV ST 6.4MMDIA
263.48.011
• For use with Rafix-SH 30 housings only, please see Related Products
• With M6 thread
• For direct screw-in installation in M6 sleeves shown in Fixing Materials
• Steel
|
|
|
|
BED FITTING PLAT STEEL 75X16MM
273.56.010
• With two keyholes, for hooking onto raised head countersunk Hospa screws as shown
• For machined-recess installation
• For use as KD fittings for beds or upholstered furniture
• Bright steel
|
|
|
|
SHELF SUPPORT SCREW NI-PL 20MM
282.19.758
• With black plastic locking screw
• Load capacity 80 kg*
• For 20 mm wood thickness
• Steel
• Note: this shelf support must be mounted with the locking screw on the top. If the locking screw is on
|
|
|
|
BRACKET BROWN 80KG 100X150X20
287.35.122
• Screw fixing
• Enamelled steel
• Load carrying capacity shown in description is given as kg per pair
|
|
|
|
BRACKET BROWN 120KG 150X200X20
287.35.131
• Screw fixing
• Enamelled steel
• Load carrying capacity shown in description is given as kg per pair
|
|
|
|
BRACKET BROWN 130KG 200X250X24
287.35.140
• Screw fixing
• Enamelled steel
• Load carrying capacity shown in description is given as kg per pair
|
|
|
|
BRACKET BROWN 150KG 200X300X26
287.35.159
• Screw fixing
• Enamelled steel
• Load carrying capacity shown in description is given as kg per pair
|
|
|
|
HNGE 110D DUOMATIC CONC HO SC
329.17.702
• Opening angle 110º
• For screw fixing
• Drilling depth 48/6
• With automatic closing spring
• With soft close mechanism integrated in hinge cup
• Ø 13.5 mm hinge cup
• Variable size
|
|
|
|
BUTT HING FIX PIN 60X34 ST GAL
354.01.042
• Unwashered, with fixed pin
• Yellow galvanised steel
|
|
|
|
BUTTERFLY HINGE ANTI BRZ 51X39
354.06.100
• Steel
|
|
|
|
BUTT HINGE POL BRASS 76X38MM
354.10.854
• Unwashered
• Brass pin
• Suitable for light duty folding doors 18-25 mm thick
• Fixing screws not included - order separately (see Fixing Materials)
• Extruded brass
|
|
|
|
TABLE HINGE ST GALV 80X26MM
354.31.031
• Unwashered, with fixed pin
• Yellow galvanised steel
|
|
|
|
TABLE HINGE ST GALV 100X32MM
354.31.040
• Unwashered, with fixed pin
• Yellow galvanised steel
|
|
|
|
SMOOTH CREAM BEIGE HOLDER 53MM
356.11.463
• For surface mounting of SMOVE door buffers shown in Related Products
• Screw fixing in Ø 3 or Ø 5 mm drilled holes
• Plastic
|
|
|
|
ADHESIVE SMOOTH HOLDER GREY
356.11.531
• For surface mounting of SMOVE door buffers shown in Related Products
• With double sided adhesive strip and screw hole for fixing
• With lip to help with positioning of adaptor
• Grey plastic
|
|
|
|
SMOOTH GREY HOLDER 53MM
356.11.563
• For surface mounting of SMOVE door buffers shown in Related Products
• Screw fixing in Ø 3 or Ø 5 mm drilled holes
• Plastic
|
|
|
|
DOOR BUFFER TRANSPARENT 7X1.5MM
356.21-0001
• Self adhesive to all surfaces
• Transparent plastic
• 1 PAD = 50 door buffers
|
|
|
|
SMOOTH PISTON CREAM BEIGE 63MM
356.33.409
• Eliminates the noise of doors and drawers slamming
• For installation in cabinet side panel opposite the hinge side
• For press-fit installation in Ø 10 mm drilled hole
• For surface mounting use with adapto
|
|
|
|
SMOOTH PISTON GREY 63MM
356.33.509
• Eliminates the noise of doors and drawers slamming
• For installation in cabinet side panel opposite the hinge side
• For press-fit installation in Ø 10 mm drilled hole
• For surface mounting use with adapto
|
|
|
|
GLASS DOOR HINGE GLASS TO WOOD
361.62.900
• Glass thickness: up to 12 mm
• Minimum carcase thickness 16 mm
• Not suitable for laminated glass
• For UV glass gluing
• Recommended door calibration: ratio of height to width 3:2 not to be exceeded
•
|
|
|
|
*********DISCONTINUED*********
361.62.901
• Glass thickness: up to 12 mm
• Minimum carcase thickness 16 mm
• Not suitable for laminated glass
• For UV glass gluing
• Recommended door calibration: ratio of height to width 3:2 not to be exceeded
•
|
|
|
|
DBL FLAP LIFT UP FITTING 200N 2.2-5.1KG
372.73.251
• For double flaps
• Gas piston with wide range of application
• Flap stays open in any position
• Piston assists when flap is opened
• Screw fixing
• Supplied with fitting and adjustment instructions
|
|
|
|
*********DISCONTINUED*********
372.73.252
• For double flaps
• Gas piston with wide range of application
• Flap stays open in any position
• Piston assists when flap is opened
• Screw fixing
• Supplied with fitting and adjustment instructions
|
|
|
|
*********DISCONTINUED*********
372.73.253
• For double flaps
• Gas piston with wide range of application
• Flap stays open in any position
• Piston assists when flap is opened
• Screw fixing
• Supplied with fitting and adjustment instructions
|
|
|
|
DISCOUNTINUED 06.01.09
372.73.254
• For double flaps
• Gas piston with wide range of application
• Flap stays open in any position
• Piston assists when flap is opened
• Screw fixing
• Supplied with fitting and adjustment instructions
|
|
|
|
*********DISCONTINUED*********
405.76.350
Single roller. Not suitable for metal doors. Height adjustable, ± 3 mm. Galvanised steel body with plastic tyred, ball bearing mounted roller
|
|
|
|
GLASS SLIDING DOOR KIT F 2 DOOR 1200MM
415.17.001
• Apllication:
Reception hatches, point of sale displays, shopfitting, laboratory furniture
• Features:
Bottom rolling sliding door gear for display cabinets, bookcases and hatches
Quiet rolling action
Woolpile top guiding
S
|
|
|
|
*********DISCONTINUED*********
416.15.500
• For glass thickness 8 mm
• Must be ordered separately, to ensure glass doors cannot be removed when SDL locking unit used
• Press fit onto top of glass panel
• Black plastic
|
|
|
|
TV LIFT 500X300MM 60KG
421.69.400
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
TV LIFT 700X380MM 80KG
421.69.410
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
TRANSFORMER 240V FOR TV LIFT
421.69.490
• Black plastic
|
|
|
|
TV LIFT 500X300MM 60KG
421.69.500
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
*********DISCONTINUED*********
421.69.513
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
*********DISCONTINUED*********
421.69.522
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
*********DISCONTINUED*********
421.69.531
• Suitable for installation in all kinds of furniture
• Radio frequency remote controlled with manual switch also included.
• Choice of capacity: 80 kg
• Complete installation and operating instructions included
|
|
|
|
COMPLETE TAMBOUR SYS SILVER FOIL
442.46.900
• For use in a 500 mm wide cabinet
• For tambour door height up to 1270 mm
• Totally self-contained, pre-tensioned unit which slides into position complete
• Fixings included
• Plastic
• Please note
|
|
|
|
GRIP PROFILE 2.5M BLCK PLASTIC
442.52.300
• For insertion in the shutter slats
• Plastic
• Not available in silver finish
|
|
|
|
GRIP PROFL L/GREY 2.5M PLASTIC
442.52.500
• For insertion in the shutter slats
• Plastic
• Not available in silver finish
|
|
|
|
GRIP PROFILE WHITE 2.5M
442.52.700
• For insertion in the shutter slats
• Plastic
• Not available in silver finish
|
|
|
|
FRONT FIXING PROFIL BLACK 2.5M
442.53.300
• For screw-mounting
• Plastic
|
|
|
|
FRONT FIXING PANEL L/GREY 2.5M
442.53.500
• For screw-mounting
• Plastic
|
|
|
|
FRONT PANEL WHITE 2.5M
442.53.700
• For screw-mounting
• Plastic
|
|
|
|
LOCK PROFILE GREY 2.5M PLASTIC
442.58.500
• For insertion in the shutter slats
• Soft lip for sealing and silent closing
• Suitable for the installation of standard commercial shutter locks
• Plastic with soft PVC sealing lip
|
|
|
|
LOCK PROFILE 2.5M WHI PLASTIC
442.58.700
• For insertion in the shutter slats
• Soft lip for sealing and silent closing
• Suitable for the installation of standard commercial shutter locks
• Plastic with soft PVC sealing lip
|
|
|
|
*********DISCONTINUED*********
442.58.780
• For plugging into the lock strip - see Related System Parts
• Plastic
|
|
|
|
PENTA ISLAND HOOD 900MM ST.ST
500.30.701
• Traditional chimney hood shape
• Hood size: 900 mm width, 600 mm depth, 150 mm height
• Overall height 790-1175; has 385 mm adjustment in chimney
• Ø 150/120 mm air outlet (system 6/5)
• Electronic touch c
|
|
|
|
W/BIN TANDEM CR-WHITE 2X15L
502.70.710
• For hinged door cabinets
• Designed to be withdrawn from the cabinet whilst the lid lifts and remains in the cabinet
• The bin housing incorporates its own runners and is secured to the cabinet floor
• To fit minimum ca
|
|
|
|
W/BIN TANDEM BROWN/GREEN 2X15L
502.70.712
• For hinged door cabinets
• Designed to be withdrawn from the cabinet whilst the lid lifts and remains in the cabinet
• The bin housing incorporates its own runners and is secured to the cabinet floor
• To fit minimum ca
|
|
|
|
PULL DOWN UTENSIL HOLDER
504.26.301
• For installation underneath cabinet or worktop
• Accessories shown included - stainless steel with rubber grip
• Rustic beech, clear lacquered
|
|
|
|
********DISCONTINUED*********
521.62.000
• For individual applications
• Comprises
1x Ø 11 mm support
1x washer
1x twin-threaded screw metric/wood; M8 x 60 mm, thread length for wood 35 mm
1x twin-threaded screw metric/metric; M8 x 25 mm DIN939
1x wall pl
|
|
|
|
TUBE SUPPORT CHROME PLATED
522.31.280
• Push fits over fastening screw
• Steel
|
|
|
|
*********DISCONTINUED*********
532.50.351
• Requires a recess 487 x 357 mm and 75 mm depth from front face of tiles for installation of back box
• 500 cd/m2 high brightness picture with a contrast ratio of 600:1
• Power requirements: 12VDC/6.67A
• Powe
|
|
|
|
ORA-ITO BUILT-IN SINGLE OVEN (TOUCH)SILV
535.00.130
• B1 ORA E
• Multifunction oven - 53 l capacity
• Oven illumination
• Conventional heating
• Grill burner. Grill heater and fan
• Lower heater with circular heater and fan. Circular heater and fan
|
|
|
|
300MM DOMINO GAS HOB
535.00.623
• 510 mm height x 288 mm width x 45 mm depth
• Cut out dimensions: 490 mm height x 268 mm width x 50 mm depth
• 1 auxiliary burner Ø 77 mm / 1.0 kW. 1 large burner Ø 129 mm / 3.0 kW
• Electronic ignition built i
|
|
|
|
*********DISCONTINUED*********
535.00.640
• 510 mm height x 686 mm width x 40 mm depth
• Cut out dimensions: 480 mm height x 560 mm width x 40 mm depth
• 2 half speed burner Ø 63.2 mm / 1.75 kW
• 1 auxiliary burner Ø 39 mm / 1.0 kW
• 1 large bu
|
|
|
|
*********DISCONTINUED*********
535.00.653
• 510 mm height x 300 mm width x 152 mm depth
• Cut out dimensions: 490 mm height x 275 mm width x 73 mm depth
• 1 x burner Ø 140 mm / 4.5 kW
• Electric ignition of gas burner
• Black glass ceramic surround
|
|
|
|
GORENJE DOMINO ELECTRIC CERAMIC HOB 30CM
535.00.663
• Black ceramic frameless hob with knob controls
• 510 mm height x 290 mm width x 30 mm depth
• Cut out dimensions: 490 mm height x 275 mm width x 50 mm depth
• Cooking areas:
- Hi-light front: Ø 145 mm 1.2 kW
|
|
|
|
750MM CERAMIC INDUCTION HOB
535.00.671
• Black ceramic frameless hob with touch control
• 510 mm height x 750 mm width x 60 mm depth
• Cut out dimensions: 490 mm height x 710 mm width x 55 mm depth
• Cooking areas:
- Left front: Ø 210 mm 2.3 kW
- Ri
|
|
|
|
ORA-ITO CERAMIC HOB 600MM BLACK
535.00.760
• ECT 600 ORA E
• Touch control
• Hi-light
• Residual heat indicator
• Bevelled edge front, chamfered side edges
• Cooking areas:
- Left front: Ø 210 mm / 2.3 kW
- Right front: Ø 145 mm /
|
|
|
|
ORA-ITO INDUCTION HOB 600MM BLACK
535.00.780
• EIT 695 ORA E
• Touch control with electronic timer
• Residual heat indicator
• Bevelled edge front, chamfered side edges
• Cooking areas:
- Left front: Ø 145 mm / 1.4 kW
- Right front: Ø 180 mm
|
|
|
|
900MM CRANBERRY RANGE COOKER (DISC)
535.01-0143
• Range dimensions: 900 mm wide x 898-925 mm high x 600 mm depth (including handles)
• Range cooker includes:
- 1x 67 litre and 1x 53 litre programmable ovens with timer and one oven light
• Electric (sealed plate) version has
|
|
|
|
900MM CREAM CLSIC RANGE COOKER (DISC)
535.01-0150
• Range dimensions: 900 mm wide x 898-925 mm high x 600 mm depth (including handles)
• Range cooker includes:
- 1x 67 litre and 1x 53 litre programmable ovens with timer and one oven light
• Electric (sealed plate) version has
|
|
|
|
900MM ST ST COOKER DUAL FUEL (DISC)
535.01.061
• Energy rating:
- Electric fan oven - class A
- Fan oven - class B
• Range dimensions: 898-925 mm height x 900 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litr
|
|
|
|
900MM SILVER COOKER DUAL FUEL (DISC)
535.01.062
• Energy rating:
- Electric fan oven - class A
- Fan oven - class B
• Range dimensions: 898-925 mm height x 900 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litr
|
|
|
|
DUAL FUEL COOKER 1100MM BLACK (DISC)
535.01.090
Energy rating:
• Multifunction oven B
• Electric fan oven A
• Range dimensions: 898-925 mm height x 1100 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litre
|
|
|
|
1100MM ELECT/DUEL FUEL CKER R/GRN (DISC)
535.01.092
Energy rating:
• Multifunction oven B
• Electric fan oven A
• Range dimensions: 898-925 mm height x 1100 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litre
|
|
|
|
1100MM NATURAL GAS COOKER CREAM (DISC)
535.01.094
Energy rating:
• Multifunction oven B
• Electric fan oven A
• Range dimensions: 898-925 mm height x 1100 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litre
|
|
|
|
1100MM BLACK CLASSIC COOKER N/GAS (DISC)
535.01.095
Energy rating:
• Multifunction oven B
• Electric fan oven A
• Range dimensions: 898-925 mm height x 1100 mm wide x 600 mm depth (including handles)
• Range cooker includes:
- 2x 67 litre
|
|
|
|
WINE COOLER LH GLOSS BLACK
535.11.000
• Wine cooler dimensions: 606 mm width, 616 mm depth (not including handle depth of 55 mm), 864 mm height (can be adjusted using height adjustable plinth included)
• Left or right hand large double glazed UV filter door to allow full view
|
|
|
|
WINE COOLER LH ST. ST.
535.11.001
• Wine cooler dimensions: 606 mm width, 616 mm depth (not including handle depth of 55 mm), 864 mm height (can be adjusted using height adjustable plinth included)
• Left or right hand large double glazed UV filter door to allow full view
|
|
|
|
WINE COOLER RH GLOSS BLACK
535.11.002
• Wine cooler dimensions: 606 mm width, 616 mm depth (not including handle depth of 55 mm), 864 mm height (can be adjusted using height adjustable plinth included)
• Left or right hand large double glazed UV filter door to allow full view
|
|
|
|
WINE COOLER RH ST. ST.
535.11.003
• Wine cooler dimensions: 606 mm width, 616 mm depth (not including handle depth of 55 mm), 864 mm height (can be adjusted using height adjustable plinth included)
• Left or right hand large double glazed UV filter door to allow full view
|
|
|
|
*********DISCONTINUED*********
535.18.000
• Dimensions (heigth x width x depth): 864 x 300 x 554 mm
• 14 bottle/42 Litre capacity
• Electronic temperature control
• LED digital temperature display
• Thermoelectric operation
• Fully reversible do
|
|
|
|
GORENJE INTEGRATED DISHWASHER 60CM
535.20.020
• GV 60010
• AAB
• With 7 programmes
• Capacity for 12 place settings
• 56 decibel
• Temperature settings 45º, 50º, 65º C
• Variable top basket
• Multifunctional lower ba
|
|
|
|
*********DISCONTINUED*********
535.30.000
• 100W/1300W
• Dimensions:
- 1. Unit, Height - 30.4 cm, width - 51 cm, Depth 47.7 cm
- 2. Internal cavity, Height - 21.7 cm, width - 35.9 cm, Depth - 35.2 cm
- 3. Cut-out for fitting (Aperture), Height - 39.7 cm, width - 56.2 cm
|
|
|
|
*********DISCONTINUED*********
535.30.001
• 100W/1300W
• Dimensions:
- 1. Unit, Height - 30.4 cm, width - 51 cm, Depth 47.7 cm
- 2. Internal cavity, Height - 21.7 cm, width - 35.9 cm, Depth - 35.2 cm
- 3. Cut-out for fitting (Aperture), Height - 39.7 cm, width - 56.2 cm
|
|
|
|
*********DISCONTINUED*********
535.80.002
• Built-in/telescopic hood now discontinued, only replacement charcoal filter available to order
|
|
|
|
*********DISCONTINUED*********
535.80.202
• Hood now discontinued, only replacement charcoal filter avaliable to order
|
|
|
|
GORENJE 900MM ST ST CHIMNEY HOOD
535.80.213
• Wall mounted hood now discontinued, only replacement charcoal filter available to order
|
|
|
|
GORENJE ISLAND COOKER HOOD GLASS CANOPY
535.80.414
Grease filter from washable aluminium
3 venting speeds
1 motor
4 halogen lights
Technical characteristics/dimensions:
• Illumination 80W
• Venting tube Ø 150 mm (system 6)
• Power 280V
• Noise l
|
|
|
|
GORENJE INT. WASHING MACHINE WHITE 6KG/1
535.90.000
Programmes:
Cotton, synthetics, delicate and silk, wool, cold wash, pre-wash and quick wash
Functions:
Quick wash setting, spin speed reduction and rinse hold
Equipment:
Shower system and water level control
Safe
|
|
|
|
GORENJE INT. WASHER DRYER WHITE 6KG/1100
535.90.010
Programmes:
Cotton, synthetics, delicate and silk, wool, pre-wash and quick wash
Functions:
Quick wash setting, spin speed reduction and rinse hold
Equipment:
Shower system and water level control
Safety system:<
|
|
|
|
1092MM BLACK FALCON COOKER CHR TRIM
537.00-0003
• Range dimensions: 1092 wide x 915-942 mm high x 600 mm depth
• Range cooker includes:
- 2x 67 litres
• Electric version has:
- Hob 1x 1.1kW/2x 1.4kW
- 1x 2.0kW / 1x 2.7kW
- Grill rating 1x 2.35kW (electric)
- Oven
|
|
|
|
900MM BLK FALCON COOKER CH TRIM
537.00-0008
• Range dimensions: 900 mm wide x 915-942 mm high x 610 mm depth
• Range cooker includes:
- 1x 67 litre and 1x 53 litre
• Dual fuel version has:
- Hob 3x 3kW, 1x 5kW / 1x 1.7kW
- Total hob rating: 15.7kW
- Grill: 1x 2.
|
|
|
|
900MM CREAM FALCON DUAL FUEL COOKER
537.00-0013
• Range dimensions: 900 mm wide x 915-942 mm high x 610 mm depth
• Range cooker includes:
- 1x 67 litre and 1x 53 litre
• Dual fuel version has:
- Hob 3x 3kW, 1x 5kW / 1x 1.7kW
- Total hob rating: 15.7kW
- Grill: 1x 2.
|
|
|
|
BASKET 240MM DEEP POL CHR-PL
544.53.244
• For use with hanging side rails (see Related Products)
• Polished chrome-plated steel
|
|
|
|
TIE RACK SILVER COLOUR 450MM
544.96.101
• For attaching to side of storage basket set frames either:
- Screw fix to wooden frame of basket set
- Hook onto steel frame of basket set - See Related Products
• Steel
|
|
|
|
SHOE RACK SILV COL 450MM
544.96.262
• For attaching to side of storage basket set frames either:
Screw fix to wooden frame of basket set
Hook onto steel frame of basket set - See Related Products
• Steel
|
|
|
|
PLASTIC CLEANING MATERIAL TRAY PIECE
545.68.297
• Cleaning materials tray piece
• To suit pull-out under sink basket
• Plastic
|
|
|
|
*********DISCONTINUED*********
546.24-0001
• Built-in depth 485 mm
• Every set comes complete with runners, centre frame, baskets, fixing materials and fitting instructions
- Hanging frame, 1394 mm high, silver epoxy coated tubular steel, 25 x 25 mm, with mounting accesso
|
|
|
|
BASKET SHELVES 2 TIER CHR PL
547.80.205
• Fixings included
• Stainless steel
|
|
|
|
BASE MOUNT ROLL+BRUSH HOLDER
547.87.224
• For fixing to wall
• Fixing materials included
• Chrome-plated steel with white ceramic accessories
|
|
|
|
BASE MOUNT ROLL+BRUSH HOLDER
547.87.225
• For fixing to wall
• Fixing materials included
• Chrome-plated steel with white ceramic accessories
|
|
|
|
CUTLERY INS F 400MM DRAW
556.24.416
• For 400 mm cabinet width
• Plastic
|
|
|
|
*********DISCOTINUED*********
556.76.778
• 85 mm height (for 90 mm internal drawer height)
• 2.5 mm material thickness
• White high gloss plastic (deep drawn)
|
|
|
|
DRAWER FRONT 140X296X20MM ALU
563.21.331
• Undrilled
• 20 mm thick
•19 mm chipboard core and 1 mm horizontal grain aluminium cover with pastel grey melamine reverse
|
|
|
|
DRAWER FR 140X496X20 MM ALU
563.21.351
• Undrilled
• 20 mm thick
•19 mm chipboard core and 1 mm horizontal grain aluminium cover with pastel grey melamine reverse
|
|
|
|
DRAWER FR 140X596X20 MM ALU
563.21.371
• Undrilled
• 20 mm thick
•19 mm chipboard core and 1 mm horizontal grain aluminium cover with pastel grey melamine reverse
|
|
|
|
*********DISCONTINUED*********
564.10.092
• 40 mm thickness
• Zebrano
|
|
|
|
*********DISCONTINUED*********
564.10.093
• 40 mm thickness
• Zebrano
|
|
|
|
*********DISCONTINUED*********
564.10.094
• 40 mm thickness
• Zebrano
|
|
|
|
*********DISCONTINUED*********
564.10.096
• 40 mm thickness
• Zebrano
|
|
|
|
*********DISCONTINUED*********
564.10.097
• 40 mm thickness
• Zebrano
|
|
|
|
WORKSURFACE 3X620X27MM NAT OAK (DISC)
564.10.141
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 3X620X40MM NAT OAK (DISC)
564.10.142
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 3X720X40MM NAT OAK (DISC)
564.10.143
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 3X960X40MM NAT OAK (DISC)
564.10.144
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 4X620X27MM NAT OAK (DISC)
564.10.145
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 4X620X40MM NAT OAK (DISC)
564.10.146
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 4X720X40MM NAT OAK (DISC)
564.10.147
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 4.2X650X40MM NAT OAK (DISC)
564.10.149
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 2MX620X40MM NAT OAK (DISC)
564.11.142
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
WORKSURFACE 2MX720X40MM NAT OAK (DISC)
564.11.145
• 27 and 40 mm thickness
• Natural oak
• Worktops are delivered raw, sanded to 150 grit finish
• Square edged ready for finishing, please see Don't Forget to Order for Danish oil
|
|
|
|
GLASS WORKTOP 1000X600MM FUSCHIA
564.15.022
• 40 mm thick - MDF, core width 6 mm glass, supplied with aluminium frame
• Length x depth (+/- 1 nn tolerance): 1000 x 620 mm
|
|
|
|
GLASS WORTOP 1000X600MM EBONY
564.15.042
• 40 mm thick - MDF, core width 6 mm glass, supplied with aluminium frame
• Length x depth (+/- 1 nn tolerance): 1000 x 620 mm
|
|
|
|
GLASS WORKTOP 1000X600MM CHALK
564.15.072
• 40 mm thick - MDF, core width 6 mm glass, supplied with aluminium frame
• Length x depth (+/- 1 nn tolerance): 1000 x 620 mm
|
|
|
|
GLASS WORKTOP 1000X600MM ZEST
564.15.082
• 40 mm thick - MDF, core width 6 mm glass, supplied with aluminium frame
• Length x depth (+/- 1 nn tolerance): 1000 x 620 mm
|
|
|
|
GLASS WORKTOP 1000X600MM CAPPACINO
564.15.142
• 40 mm thick - MDF, core width 6 mm glass, supplied with aluminium frame
• Length x depth (+/- 1 nn tolerance): 1000 x 620 mm
|
|
|
|
*********DISCONTINUED*********
564.19.000
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.001
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.002
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.003
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.004
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.005
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.006
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
*********DISCONTINUED*********
564.19.007
• 40 mm thick: 0.8 mm thick stainless steel wrapped around 18 mm thick MRMDF core (Moisture Resistant MDF) and 19 mm MFC (Melamine Faced Chipboard)
• Brushed stainless steel
• Dimensions given as length x depth x thickness
R
|
|
|
|
END PNL HEATER 595X700 FUSHIA
564.95.520
• Glass conforms to BS 62606 and PREN 12600
• Hygienic and easy to clean
• Glass is structurally very strong
• Opaque coloured glass - does not allow any show through of background
• Lifetime guarantee on the col
|
|
|
|
END PANEL HEATER 595X700MM EBONY
564.95.540
• Glass conforms to BS 62606 and PREN 12600
• Hygienic and easy to clean
• Glass is structurally very strong
• Opaque coloured glass - does not allow any show through of background
• Lifetime guarantee on the col
|
|
|
|
END PANEL HEATER 595X700MM
564.95.570
• Glass conforms to BS 62606 and PREN 12600
• Hygienic and easy to clean
• Glass is structurally very strong
• Opaque coloured glass - does not allow any show through of background
• Lifetime guarantee on the col
|
|
|
|
END PANEL HEATER 595X700 ZEST
564.95.580
• Glass conforms to BS 62606 and PREN 12600
• Hygienic and easy to clean
• Glass is structurally very strong
• Opaque coloured glass - does not allow any show through of background
• Lifetime guarantee on the col
|
|
|
|
END PNL HEATER 595X700 CAPPUC
564.95.640
• Glass conforms to BS 62606 and PREN 12600
• Hygienic and easy to clean
• Glass is structurally very strong
• Opaque coloured glass - does not allow any show through of background
• Lifetime guarantee on the col
|
|
|
|
SINGLE LEVER MIXER TAP WITH LED LIGHT
566.90.210
• Overall height: 412 mm
• LED lighting within spout - changes colour according to temperature
• 360° swivel spout, 550 mm pull-out rinse
• Ceramic cartridge
• 2.0 bar min. operating pressure
• Flex
|
|
|
|
PLSTC SOFFIT VENT 2440X54MM
571.80.739
• White plastic
|
|
|
|
CORNER BASIN W TOWEL RAIL 490X
588.01.000
• Designer style one piece basin wall or optional corner mounted
• Can be used on a straight wall with the towel, or in a corner without
• White pottery, with chrome towel rail and waste
• Flexi tubes and wall connections
|
|
|
|
MILANO BASIN 1 TAP HOLE 665X51
588.01.020
• Elegant wash basin
• Pedestal must be ordered separately
• White pottery
• Taps must be ordered separately, see Related Products
|
|
|
|
MILANO PEDESTAL WHITE POTTERY
588.01.021
• Elegant wash basin
• Pedestal must be ordered separately
• White pottery
• Taps must be ordered separately, see Related Products
|
|
|
|
CONTRACT BASIN 2 TAP HOLE 520X
588.01.040
• Compact basin and pedestal
• White pottery
• Taps must be ordered separately, see Related Products
|
|
|
|
CONTRACT PEDESTAL WHITE POTTER
588.01.041
• Compact basin and pedestal
• White pottery
• Taps must be ordered separately, see Related Products
|
|
|
|
MINIMALIST BOTTLE TRAP
588.01.098
• Designer style one piece basin wall or optional corner mounted
• Can be used on a straight wall with the towel, or in a corner without
• White pottery, with chrome towel rail and waste
• Flexi tubes and wall connections
|
|
|
|
PUSH BATH WASTE+OVERFLOW
588.01.099
• Undrilled for taps
• Manufactured from double skin acrylic
• With a chrome towel rail runner around the outside of the bath
• Taps must be ordered separately, see Related Products
• Push bath waste and overflow
|
|
|
|
PUSH BATH WASTE+OVERFLOW
588.01.099
• Undrilled for taps
• Manufactured from double skin acrylic
• With a chrome towel rail runner around the outside of the bath
• Taps must be ordered separately, see Related Products
• Push bath waste and overflow
|
|
|
|
TRIBECA WC - PAN; CISTERN AND SEAT WHITE
588.01.400
• 2 piece WC and seat
• Push button dual 3/6 litre cistern flush, polished chrome
• White pottery
• White plastic seat
|
|
|
|
WC PAN
588.01.420
• Compact close coupled WC
• White pottery
• Water saving dual flush push button, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
WC CISTERN & FITTINGS
588.01.421
• Compact close coupled WC
• White pottery
• Water saving dual flush push button, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
WC SEAT
588.01.423
• Compact close coupled WC
• White pottery
• Water saving dual flush push button, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
MILANO WC PAN WHITE 400MM
588.01.490
• Flowing design WC
• Push button economical dual 3/6 litre cistern flush, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
MILANO CISTERN WHITE
588.01.493
• Flowing design WC
• Push button economical dual 3/6 litre cistern flush, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
MILANO WC SEAT WHITE
588.01.495
• Flowing design WC
• Push button economical dual 3/6 litre cistern flush, chrome polished
• Pan, cistern and seat must be ordered separately
|
|
|
|
CONTRACT BATH ACRYLIC BATH 170
588.01.600
• Made from 5 mm acrylic with encapsulated baseboard
• Robust white acrylic bath front panel (order separately)
• Taps must be ordered separately, see Related Products
|
|
|
|
CONTRACT BATH FRONT PANEL WHIT
588.01.601
• Made from 5 mm acrylic with encapsulated baseboard
• Robust white acrylic bath front panel (order separately)
• Taps must be ordered separately, see Related Products
|
|
|
|
TRIBECA FREESTANDING BATH WHIT
588.01.640
• Undrilled for taps
• Manufactured from double skin acrylic
• With a chrome towel rail runner around the outside of the bath
• Taps must be ordered separately, see Related Products
• Push bath waste and overflow
|
|
|
|
QUADRANT SHOWER ENCLOSURE 800M
588.01.734
• 2 sizes available 800 or 900 mm
Shower doors:
• 6 mm safety glass with chrome frame and handles
• Suitable for use with power showers
• Doors glide on clip out runners for ease of cleaning
• 5 year m
|
|
|
|
QUADRANT SHOWER ENCLOSURE 900M
588.01.736
• 2 sizes available 800 or 900 mm
Shower doors:
• 6 mm safety glass with chrome frame and handles
• Suitable for use with power showers
• Doors glide on clip out runners for ease of cleaning
• 5 year m
|
|
|
|
EASY CLEAN SHOWER TRAY WASTE
588.01.799
• 2 sizes available 800 or 900 mm
Shower doors:
• 6 mm safety glass with chrome frame and handles
• Suitable for use with power showers
• Doors glide on clip out runners for ease of cleaning
• 5 year m
|
|
|
|
FURNITURE FOOT ALU 104X65MM
634.19.011
• Screw fixing
• With fixed mounting plate
• Polished aluminium with felt glide
|
|
|
|
FURNITURE FOOT ALU 118X65MM
634.19.012
• Screw fixing
• With fixed mounting plate
• Polished aluminium with felt glide
|
|
|
|
FURNITURE FOOT ALU 154X75MM
634.19.013
• Screw fixing
• With fixed mounting plate
• Polished aluminium with felt glide
|
|
|
|
FURNITURE FOOT ALU 168X75MM
634.19.014
• Screw fixing
• With fixed mounting plate
• Polished aluminium with felt glide
|
|
|
|
TW.WH. CAST BLACK PLATE 50MM
660.07.321
• Ø 50 mm
• With 42 x 42 mm mounting plate
• Maximum load carrying capacity 50 kg per castor
• Matt black plastic
|
|
|
|
TW.WH. CAST BLACK PLATE 50MM
660.07.321
• Ø 50 mm
• With 42 x 42 mm mounting plate
• Maximum load carrying capacity 50 kg per castor
• Matt black plastic
|
|
|
|
TW.WH. CAST B BLACK PLATE 50MM
660.08.321
• Ø 50 mm
• With 42 x 42 mm mounting plate
• Maximum load carrying capacity 50 kg per castor
• Matt black plastic
|
|
|
|
TELEPHONE SWIV ARM TRAY BLACK (DISC)
818.47.260
• For desk top thickness 19 - 55 mm
• Consists of swivel arm, clamp fitting, universal tray and housing
• Plastic
|
|
|
|
TELEPH SWIV ARM TRAY ANTHRACIT
818.47.360
• For desk top thickness 19 - 55 mm
• Consists of swivel arm, clamp fitting, universal tray and housing
• Plastic
|
|
|
|
TRACK HOLDER GALV ST 96X43MM
819.13.984
• Mount track holders at approx. 800 mm intervals
• For vertical screw fixing
• Steel
|
|
|
|
*********DISCONTINUED*********
823.86.703
• Plastic
|
|
|
|
*********DISCONTINUED*********
827.07-0010
• Consists of:
- Built-on light “L-plus” 230V, 50Hz
- 1 x fluorescent tube
- Mains cable 2 m long
- Wattage 6W, Length 410 mm
- 300 mm white cable with universal door switch
- Silver coloured aluminium body, transparen
|
|
|
|
*********DISCONTINUED*********
827.25.000
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11 - Max. 60W
• Stainless steel, with opal diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.020
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11W (Max. 60W)
• Stainless steel, with opal diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.030
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11W (Max. 60W)
• Stainless steel, with opal diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.040
• 240V Mains powered
• IP44
• Bulbs not included, must be ordered separately, please see Don't Forget to Order
• Lamp - 3 x E27
• Wattage - 11W (Max. 60W)
• Stainless steel, with opal diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.050
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11W (Max. 60W)
• Stainless steel, with clear glass diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.060
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11W (Max. 60W)
• Stainless steel, with clear glass diffuser
|
|
|
|
*********DISCONTINUED*********
827.25.070
• 240V Mains powered
• IP44
• Bulbs not incuded, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.25.080
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.25.089
• 240V Mains powered
• IP44
• Bulbs not incuded, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.25.089
• 240V Mains powered
• IP44
• Bulbs not incuded, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.25.089
• 240V Mains powered
• IP44
• Bulbs not incuded, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.25.089
• 240V Mains powered
• IP44
• Bulbs not incuded, must be ordered separately
• Lamp - 2 x GU10
• Wattage - Max. 50W
• Stainless steel
|
|
|
|
*********DISCONTINUED*********
827.26.900
• 240V Mains powered
• IP44
• Bulb not included, must be ordered separately, please see Don't Forget to Order
• Lamp - E27
• Wattage - 11W (Max. 60W)
• Cut-out 90 x 230 mm
• Die cast alumin
|
|
|
|
*********DISCONTINUED*********
827.27.000
• Mains powered with 0.25 bare ended cable
• IP65
• Bulb not included, must be ordered separately
• Lamp - GU10
• Wattage - Max. 50W
• Stainless steel, with glass lens
|
|
|
|
*********DISCONTINUED*********
827.27.010
• Mains powered with 0.25 bare ended cable
• IP65
• Bulb not included, must be ordered separately
• Lamp - GU10
• Wattage - Max 50W
• Stainless steel, with glass lens
|
|
|
|
TV/FM/SAT OUTLET NON-ISOLATED BSS/WHI
829.52.060
• Single (non-isolated) where one outlet required
• 35 mm box depth required (box not included)
• Sheet brass or stainless steel
|
|
|
|
TV/FM/SAT OUTLET NON-ISOLATED PCP/WHI
829.52.260
• Single (non-isolated) where one outlet required
• 35 mm box depth required (box not included)
• Sheet brass or stainless steel
|
|
|
|
TV/FM/SAT OUTLET NON-ISOLATED SB/BRWN
829.52.560
• Single (non-isolated) where one outlet required
• 35 mm box depth required (box not included)
• Sheet brass or stainless steel
|
|
|
|
12V/7.2W POWER LED ALU TRACK LIGHT 800MM
830.62.713
• Dims (height x depth): 10 x 25 mm
• Surface mounting, for under cabinet mounting
• Screw fixing, fixings included
• High flat power LED light, lamp life 30,000 hours
• With integrated temperature control
&#
|
|
|
|
12V/7.2W POWER LED ALU TRACK LIGHT 900MM
830.62.714
• Dims (height x depth): 10 x 25 mm
• Surface mounting, for under cabinet mounting
• Screw fixing, fixings included
• High flat power LED light, lamp life 30,000 hours
• With integrated temperature control
&#
|
|
|
|
*********DISCONTINUED*********
830.94.900
• 240V Mains powered
• IP56
• Bulb - 36 x white LED
• Wattage - 3.6W
• Cut-out 100 x 200 mm
• Non-dimmable
• Crystal glass, siver coloured aluminium
|
|
|
|
*********DISCONTINUED*********
830.95.700
• Comes complete with LEDs
• No replacement/spare bulbs necessary
• Mains powered with 0.25 m cable
• IP65
• Lamp - 8 x LED
• Wattage - 1.1W
• Stainless steel, with glass lens
|
|
|
|
*********DISCONTINUED*********
830.95.710
• Plug to indoor transformer = 3 m
• Lead from indoor transformer to outdoor
connectors = 6 m
• Mains powered with 0.25 bare ended cable
• IP65
• 1 set consists of:
3 lights, including leads and transformer
|
|
|
|
*********DISCONTINUED*********
830.95.720
• Mains with plug-in transformer (indoor)
• IP44
• 5 m cable with each fitting
• 5 m cable from plug to transformer
• Bulb - LED
• Lamp - 1 x LED
• Head Ø14 mm
• Height 20 mm
&#
|
|
|
|
*********DISCONTINUED*********
830.95.730
• Mains with plug-in transformer (indoor)
• IP65
• Fit into Ø 40 mm hole
• Consists of:
6 x Ø14mm LED lights with 3 m cable
1 x 12V indoor transformer with 10 way slave junction box
1 x 10 way slave jun
|
|
|
|
*********DISCONTINUED*********
830.95.800
• Comes complete with LEDs
• No replacement/spare bulbs necessary
• Mains powered with 0.25 m cable
• IP65
• Lamp - 8 x LED
• Wattage - 1.1W
• Stainless steel, with glass lens
|
|
|
|
*********DISCONTINUED*********
830.95.810
• Plug to indoor transformer = 3 m
• Lead from indoor transformer to outdoor
connectors = 6 m
• Mains powered with 0.25 bare ended cable
• IP65
• 1 set consists of:
3 lights, including leads and transformer
|
|
|
|
*********DISCONTINUED*********
830.95.820
• Mains with plug-in transformer (indoor)
• IP44
• 5 m cable with each fitting
• 5 m cable from plug to transformer
• Bulb - LED
• Lamp - 1 x LED
• Head Ø14 mm
• Height 20 mm
&#
|
|
|
|
*********DISCONTINUED*********
830.95.830
• Mains with plug-in transformer (indoor)
• IP65
• Fit into Ø 40 mm hole
• Consists of:
6 x Ø14mm LED lights with 3 m cable
1 x 12V indoor transformer with 10 way slave junction box
1 x 10 way slave jun
|
|
|
|
*********DISCONTINUED*********
892.12.206
• For screw mounting to wardrobe wall or inside of door or for use with wall rail shown in Related Products
• Adjustable from 480-750 mm
• Chrome-plated steel with plastic mounts
|
|
|
|
*********DISCONTINUED*********
901.03.172
• Design: Odile Decq-Benoit Comette
• Single pull handle
• Fixing bolts not included (order separately, see Fixing Materials)
• Back to back fixing or secret face fixing
• Brass
• Please note<
|
|
|
|
*********DISCONTINUED*********
901.03.174
• Design: Odile Decq-Benoit Comette
• Single pull handle
• Fixing bolts not included (order separately, see Fixing Materials)
• Back to back fixing or secret face fixing
• Brass
• Please note<
|
|
|
|
PVD LEV HDL ON LATCH PLATE PBR
901.99.137
• Pair of lever handles on face fixing latch backplates
• Grub screw fixing on 8 mm steel spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit doors 35-44 mm thick
• Brass<
|
|
|
|
PVD LEV HDL ON LCK PLATE PBR
901.99.147
• Pair of lever handles on face fixing standard keyway lock backplates
• Grub screw fixing on 8 mm steel spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit doors 35-44 mm thick
|
|
|
|
PVD LEV HDL ON CYL LCK PLATE PBR
901.99.157
• Pair of lever handles on face fixing profile cylinder lock backplates
• Grub screw fixing on 8 mm steel spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit doors 35-44 mm thick
|
|
|
|
PVD LEV HDL ON BTROOM PLATE PBR
901.99.167
• Pair of lever handles on face fixing bathroom lock backplates
• Grub screw fixing on 8 mm steel spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit doors 35-44 mm thick
•
|
|
|
|
OVAL LEVER HANDLE 120X52MM SSS
902.20.600
• Design: Studio Fusital
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit do
|
|
|
|
OVAL LEVER HANDLE PSS 120X52MM
902.20.601
• Design: Studio Fusital
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit do
|
|
|
|
CERVINO BOWED LEVER HANDLE SSS 140MM
902.20.630
• Design: Studio Fusital
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit do
|
|
|
|
BOW LEVER HANDLE PSS 140X52MM
902.20.631
• Design: Studio Fusital
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit do
|
|
|
|
ST ST LVR HDL ON ROSES SSS
902.20.636
• Design: Antonio Citterio
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit
|
|
|
|
ST ST LVR HDL ON ROSES PSS
902.20.637
• Design: Antonio Citterio
• Pair of lever handles on concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Fixings included
• To suit
|
|
|
|
TESSA LVR HDL ON BTHRM LCK PLT SSS
902.94.226
• Pair of lever handles on bathroom lock backplates
• Grub screw fixing on 8 mm high-grade alloy steel spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors up to
|
|
|
|
*********DISCONTINUED*********
902.94.236
• Pair of lever handles on bathroom lock backplates
• Grub screw fixing on 8 mm high-grade alloy steel spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors up to
|
|
|
|
*********DISCONTINUED*********
902.94.246
• Pair of lever handles on bathroom lock backplates
• Grub screw fixing on 8 mm high-grade alloy steel spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors up to
|
|
|
|
*********DISCONTINUED*********
902.94.314
• Pair of lever handles on bathroom lock backplates
• Grub screw fixing on 8 mm high-grade alloy steel spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors up to
|
|
|
|
*********DISCONTINUED*********
902.94.316
• Pair of lever handles on bathroom lock backplates
• Grub screw fixing on 8 mm high-grade alloy steel spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors up to
|
|
|
|
*********DISCONTINUED*********
903.30.150
• Pair of lever handles on Ø 53 mm concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors 35-44 mm thick
|
|
|
|
*********DISCONTINUED*********
903.30.152
• Pair of lever handles on Ø 53 mm concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors 35-44 mm thick
|
|
|
|
FRAMU ST ST LEV HDL ON ROSES SSS
903.30.154
• Pair of lever handles on Ø 53 mm concealed fixing roses
• Grub screw fixing on 8 mm spindle
• Sprung, for use with standard duty followers
• Bolt through fixings included
• To suit doors 35-44 mm thick
|
|
|
|
WC THUMBTURN/INDICATOR SET PAA
904.54.861
• Comprises thumbturn and indicator with emergency release
• 5 mm spindle included for 44-54 mm door thickness
• Fixing screws included
• Aluminium
|
|
|
|
SPINDLE ADAPTOR 8-10MM
909.40.502
• To convert 8 mm spindle to 10 mm
• Bright steel
|
|
|
|
MORTICE BATHROOM LOCK 64MM 5MM SSS
911.02.206
• Operation: Latchbolt operated by lever handles. Deadbolt operated by turn/emergency release
• Case: Epoxy powder coated steel, 17 mm wide
• Forend: Square, 2 piece. Steel or brass
• Strike plate: Square, flat. Included.
|
|
|
|
MORTICE BATHROOM LOCK 64MM 5MM PBR
911.02.207
• Operation: Latchbolt operated by lever handles. Deadbolt operated by turn/emergency release
• Case: Epoxy powder coated steel, 17 mm wide
• Forend: Square, 2 piece. Steel or brass
• Strike plate: Square, flat. Included.
|
|
|
|
MORTICE BATHROOM LOCK 64MM 8MM SSS
911.02.210
• Operation: Latchbolt operated by lever handles. Deadbolt operated by turn/emergency release
• Case: Epoxy powder coated steel, 17 mm wide
• Forend: Square, 2 piece. Steel or brass
• Strike plate: Square, flat. Included.
|
|
|
|
MORTICE BATHROOM LOCK 64MM 8MM PBR
911.02.211
• Operation: Latchbolt operated by lever handles. Deadbolt operated by turn/emergency release
• Case: Epoxy powder coated steel, 17 mm wide
• Forend: Square, 2 piece. Steel or brass
• Strike plate: Square, flat. Included.
|
|
|
|
REBATE KIT F SASHLOCK 13MM BRA
911.22.373
• Suitability: Era 64 mm and 76 mm sashlock (Related Products)
• Finish: Brass and satin
• Spacers, fixing and fitting instructions included
|
|
|
|
*********DISCONTINUED*********
911.22.374
• Suitability: Era 64 mm and 76 mm sashlock (Related Products)
• Finish: Brass and satin
• Spacers, fixing and fitting instructions included
|
|
|
|
*********DISCONTINUED*********
911.26.012
• Operation: Push button release for spring pull
• Case: Lacquered steel
• Forend: Radius, 1 piece, stainless steel and brass
• Strike plate: Radius flate, included
• Hook bolt: Zinc diecast, nickel-plated
|
|
|
|
*********DISCONTINUED*********
911.26.013
• Operation: Push button release for spring pull
• Case: Lacquered steel
• Forend: Radius, 1 piece, stainless steel and brass
• Strike plate: Radius flate, included
• Hook bolt: Zinc diecast, nickel-plated
|
|
|
|
*********DISCONTINUED*********
911.26.021
• Operation: Hookbolt operated by cylinder
• Case: Lacquered steel
• Forend: Radius, 1 piece, stainless steel or brass
• Strike plate: Radius, flat, included, stainless steel or brass
•
|
|
|
|
COMPASS BOLT MORTICE LOCK PB
911.26.022
• Operation: Hookbolt operated by cylinder
• Case: Lacquered steel
• Forend: Radius, 1 piece, stainless steel or brass
• Strike plate: Radius, flat, included, stainless steel or brass
•
|
|
|
|
LEVER HDL AND LOCK SET LH SSS
911.78.021
• Handed
• 2x Large lever handles
• Emergency release indicator
• Special bathroom lock, stainless steel forend and strike plate
• Self adhesive instruction badge ‘Lift lever to lock’
• Bolt
|
|
|
|
LEVER HDL AND LOCK SET PAA
911.78.023
• Handed
• 2x Large lever handles
• Emergency release indicator
• Special bathroom lock, stainless steel forend and strike plate
• Self adhesive instruction badge ‘Lift lever to lock’
• Bolt
|
|
|
|
*********DISCONTINUED*********
912.05.080
• To attach mounting plate to glass door
• One required per door
|
|
|
|
ECONOMY MECH DIGITAL LOCK SAT CHR
912.06.204
• Lever handle operated
• For internal and external applications
• For doors 35-65 mm thick
• With 60 mm backset deadlocking tubular latch
• Single user code of 4-10 digits
• Number of combinations: 40,0
|
|
|
|
*********DISCONTINUED*********
912.06.208
• Lever handle operated
• For internal and external applications
• For doors 35-65 mm thick
• With 60 mm backset deadlocking tubular latch
• Single user code of 4-10 digits
• Number of combinations: 40,0
|
|
|
|
********DISCONTINUED********
912.09.200
• Enables customers to alert staff to their needs i.e. to deploy a portable ramp or open door
• Specialist installation is required
• Comprises:
1x Door entry panel
1x Telephone
1x Power supply unit
• Door
|
|
|
|
BUTT HINGE SAT ST/ST 102X89MM
926.95.000
• Concealed bearing triple-knuckle
• 4 non detachable, self-lubricating bushings
• With non removable pin (NRP)
• Ø 6 mm fixing screws supplied
• Grade 316 stainless steel
|
|
|
|
BUTT HINGE POL ST/ST 102X89MM
926.95.001
• Concealed bearing triple-knuckle
• 4 non detachable, self-lubricating bushings
• With non removable pin (NRP)
• Ø 6 mm fixing screws supplied
• Grade 316 stainless steel
|
|
|
|
B/B JOINT HINGE BLACK 102X76MM
926.95.016
• Drilled ANSI pattern
• Ball bearings in 2 joints
• Button tipped barrel for added security
• Mild steel
• BS 7352 class 8
|
|
|
|
ELEC-MECH OVERHEAD DOOR CLOSER
931.10.979
• Specification:
Surface mounted eccentric rack and pinion electrohydraulic overhead door closer with flat form arm for doors up to 1100 mm wide, with adjustable closing force, hydraulic latch action
All adjustments at front of closer
When
|
|
|
|
TIMBER FIRE DOOR KIT
931.14.928
• To suit door closer in Related Products
• Comprises two parts - closer body and arm
• Intumescent material
|
|
|
|
*********DISCONTINUED*********
931.83.601
• Specification:
Surface mounted rack and pinion door closer with adjustable arm, for doors up to 1100 mm.
Variable closing force and latch action
• Standard features:
Universal fixing
Power size 3-4
Fire test
|
|
|
|
*********DISCONTINUED*********
931.87.900
• Specification:
- Suitable for doors up to 2100 mm high and 700-900 mm wide
- Max. door weight 50 kg
- Unit requires 5V connection
• Features:
- Allows the door to swing freely until the smoke alarm is activated
- Stops the
|
|
|
|
*********DISCONTINUED*********
932.10.310
• For sealing gap between floor spring box and mechanism
• For use with external or wet area applications
• Two component compound. 0.4 kg
|
|
|
|
FLOOR GUIDE SURF MTD NAT COL NYLON
940.80.038
• Adjustable
• Medium duty
• Natural coloured nylon
|
|
|
|
KLOSE SET
940.80.087
• Klose self closing fitting set for 1 door comprises:
Guide roller (1 pc)
- Track mounted, black plastic, with belt holders
Clamp (1 pc)
- With slowing device and nylon toothed belt. Black plastic/galvanised steel
T
|
|
|
|
RECTANGULAR HANDLE 156X73 ALU COL LACQ
941.12.050
• Stick on
• Plastic
|
|
|
|
FASCIA END SET ANOD ALU
941.12.060
• Silver anodised aluminium
|
|
|
|
DRILLING AND ROUTING JIG 140X80MM
941.12.090
• For use with RSO and RSU system
|
|
|
|
*********DISCONTINUED*********
943.26.032
• Screw fixing
• Stainless steel plate with nylon roller
|
|
|
|
ADJ HIT+MISS VENT 282X106MM WH
959.18.027
• Includes plastic flyscreen
• Surface fixing
• Includes fixing screws
• White plastic
|
|
|
|
BATHROOM HARIDRYER 495X440X375MM MU
980.57.037
• 1500W mains plug not included (please see Don't Forget to Order)
• White
• HxWxD: 460 x 230 x 115 mm
|
|
|
|
SOAP DISPENCER POL CHR PL
980.62.042
• Fixing materials included
• Chrome plated brass
|
|
|
|
HOUSE NO. 0 BR.POL PVD 152MM
987.20.108
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 1 BR.POL PVD 152MM
987.20.118
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 2 BR.POL PVD 152MM
987.20.128
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 3 BR.POL PVD 152MM
987.20.138
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
NUMERALS POL BRASS
987.20.148
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 5 BR.POL PVD 152MM
987.20.158
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 6/9 BR.POL PVD 152MM
987.20.168
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 7 BR.POL PVD 152MM
987.20.178
• 156 mm high
• Lug fixing
• Brass
|
|
|
|
HOUSE NO. 8 BR.POL PVD 152MM
987.20.188
• 156 mm high
• Lug fixing
• Brass
|
|
0208 123 1181 
